Installing an AGP Graphics Card

By Mark Kyrnin, About.com Guide

In order to properly install the card into the case, the slot cover that matches up to the AGP card slot needs to be removed. Be sure to check which PC card slot cover lines up with the AGP card slot because it is not always the very far left cover. Removal typically requires unscrewing the cover from the backplane and sliding it out, but some new tool free cases just slide or push out.

Previous

• Intro and Powering Down
• Opening up the Computer Case
• Remove the PC Card Slot Cover
• Placing the Card in the AGP Slot
• Closing up the Computer Case
• Plugging the Monitor In
• Power the Computer Up

Next