Installing Cold Cathode Flourescent Lights (CCFLs)

Strapping the Tubes to the Case

Attach the Tubes to the Feet

Mark Kyrnin

With the feet mounted to the case, it is now time to attach the tubes to the feet. This is typically done by use small plastic zip ties. Feed the tie through the hole in the foot on the case and then place the tube onto the foot. Pull the tie around the tube and tighten the tie to hold the tube onto the case.

• Intro and Powering Down the Computer
• Opening up the Computer
• Determining Where to Install
• (Optional) Switch Installation
• Mounting the Voltage Inverter
• Placing the Feet for the Lights
• Strapping the Tubes to the Case
• Connecting the Internal Power
• Close up the Computer Case
• Powering Back Up