Installing a Floppy Drive

By Mark Kyrnin, About.com Guide

At this point, the physical installation of the floppy drive into the computer is finished. Close the computer case up by returning the cover or panel to the case. Be sure to fasten the cover or panel to the case using the screws that were previous removed.

• Intro and Powering Down
• Open Up the Computer
• Sliding the Drive Into the Case
• Connect the Floppy Cable to the Motherboard
• Plug the Cable into the Floppy Drive
• Connect Power to the Floppy Drive
• Close up the Computer Case
• Power Up the Computer