Installing Notebook Memory Modules

(Optional) Remove Old Module

Remove Old Modules

©Mark Kyrnin

If replacing or upgrading an existing memory module, remove the memory modules by undoing and module clamps and gently lifting the edge of the module to a 45-degree angle and then pulling the module out of the slot.

• Intro and Powering Down
• Locating the Memory Access Panel
• Remove Any Screws From Access Panel
• Remove the Access Panel
• (Optional) Remove Old Module
• Align the Memory Module
• Secure the Memory Module
• Replace the Memory Access Panel
• Fasten the Access Panel to the Case
• Power Up the Notebook