Installing a Primary IDE Hard Drive

Open Up the Computer Case

Remove the Case Cover

©Mark Kyrnin

Next the computer case needs to be opened up. The method for opening up the computer case will vary depending upon the case design. Most new cases use either a side panel or door while older cases may require the whole cover be removed. Remove any screws that hold the cover to the case and then remove the panel or cover.

• Intro and Powering Down
• Open Up the Computer Case
• Set the Drive Mode Jumper
• Insert the Drive in the Case
• Attach IDE Cable to the Motherboard
• Plug the IDE Cable to the Hard Drive
• Plug the Power to the Drive
• Close Up the Computer
• Power Up the Computer