Attach the furthest connector on the ribbon cable to the hard drive. This connector will often be black or labeled "Primary". Make sure that the red stripe on the cable is placed at pin 1 of the connector on the hard drive. Most drives are now keyed so the cable will only fit in one particular way.
Installing a Primary IDE Hard Drive
By Mark Kyrnin, About.com Guide
Explore PC Hardware / Reviews
Must Reads
About.com Special Features
Stay connected and entertained with reviews on tips on the latest HDTVs, cellphones and more. More >
Easy ways to connect two computers for networking purposes. More >
©2009 About.com, a part of The New York Times Company.
All rights reserved.